This is new series in Luminlay. SBW,SGW series have a white pipe, so it looks more clear under daylight. For good appearance, please leave more than 1mm when cut by a nipper. And use #180 sand papar with hard pad to shape it. And use #240, #400 for final process.
SBW-23(blue 2mm dia. with 3mm dia. white pipe *70mm JPY2,100)
SGW-23(green 2mm dia. with 3mm dia. white pipe *70mm JPY2,100)
SG-25(green 2.5mm dia.*60mm JPY1,800)
SG-30(green 3mm dia.*60mm JPY1,800)
Large side position mark for basses !
SG-40(green 4mm dia.*60mm JPY2,400)
SG-50(green 5mm dia.*60mm JPY2,600)
SGM-23(green 2mm dia. with 3mm dia. black pipe *60mm JPY2,000)
SGM-35(green 3mm dia. with 5mm dia. black pipe *60mm JPY2,400)
SGM-46(green 4mm dia. with 6mm dia. black pipe *60mm JPY2,800)
SB-25(blue 2.5mm dia.*60mm JPY1,800)
SB-30(blue 3mm dia.*60mm JPY1,800)
SBM-23(blue 2mm dia. with 3mm dia. black pipe *60mm JPY2,000)
SBM-35(blue 3mm dia. with 5mm dia. black pipe *60mm JPY2,400)
Luminous matarial absorbs short wave lights such as blue,violet ultra violet. Some venue lighting systems do not, however, contain these light waves that Luminlay depends upon for charging. In such cases, the Luminlay light charger (which can be easily kept in a pocket) can be used to charge each position marker within a few seconds. If you put it into your pocket, you can charge lights on stage. This light charger features a super-bright blue LED with a rugged metal casing.
Fret lines for fretless bass